Seachem Test Kit Iron

MultiTest™ Iron

• Measures iron to less than 0.05 mg/L
• Multi-cavity plate for simultaneous testing of up to 6 tests at the same time
• Includes reference for test validation
• Marine or Freshwater

Iron is of no importance in fish only aquaria; however, iron over 0.5 mg/L may be toxic to some species and should be avoided. Under normal conditions, iron is virtually impossible to maintain at measurable concentrations in seawater. Natural seawater concentration for iron is about 0.01 mg/L. Iron is important in planted aquaria and should be maintained between 0.1 to 0.2 mg/L.

MultiTest™ Iron measures both ionic and most chelated iron in freshwater or marine water to less than 0.05 mg/L. It performs over 75 tests and contains a reference sample for validation.

Features

75 Tests

MultiTest™ Iron performs over 75 tests

And with the multi-cavity test plate, multiple tests can be run at the same time.

Accuracy

Range

Measures between 0–2.0 mg/L iron

Precision

Detectable changes on the colour chart in 0.05 mg/L increments.

Reference Sample

It isn't necessary to run a reference test to use this kit; however, its proper performance can be validated by running a test in the normal manner except that the reference sample is used in place of aquarium sample. You might choose to run a reference test if you have cause to believe the test is giving incorrect results.

Colour Chart

All MultiTest™ test kits come with an easy-to-read colour chart. It features a 5 cm viewing window to help isolate colour and match as closely as possible to the test sample

Opaque Multi-Cavity Test Plate

All MultiTest™ test kits are read from an opaque white test plate. The sliding colour chart along with the six-cavity test plate allows for easy reading and comparisons of several samples at the same time.

MultiTest™ Iron Kit Contents

• Iron Reagent
• Iron Reference
• Spoon
• Sample Pipette
• Low Range Cuvette
• Iron Colour Chart
• Multi-Cavity Test Plate
• Instructions