Car Clutch Alignment Tool,Precise Alignment Tools Automotive Kit with 2PCS Expansion Clamps,Auto Clutch Plate Correction Tool Car Accessories for Most Cars & Light Trucks

Center It Right, Bolt It Tight, One Tool Gets The Job DoneProduct AttributesColors: BlackSizes: 5.1*2.84*2.84 inchWeight: 4.4 ozMaterial: PVCPackaging: Car Clutch Alignment Tool*1, Expansion Cone Clip*2Package Size: 7.99*5.56*2.74 inchProduct InstallationReplace The Expansion Cone Clip:1. Loosen top knob2. Disassemble threaded post3. Take out long adjusting screw4. Replace the expansion cone clip with the appropriate oneAlignment Work:1. Select the applicable expansion cone clamp and install it on the clutch alignment tool2. Place the clutch disc and pressure plate together and insert the clutch alignment tool in the hole3. Tighten the knob at the top first, then the knob at the bottomProduct Functions & Features1. This tool is intended for single-disc clutch arrangements found in many passenger cars and light trucks. It is not suitable for dual-disc clutch assemblies. Review your vehicle's clutch type prior to ordering to confirm fitment2. The body is made from PVC, a material that does not develop rust when splashed with water or stored in humid conditions. It remains functional over repeated uses without special care

• Centering Aid for Clutch Installation: Using this clutch alignment tool helps position the clutch disc and pressure plate so they line up correctly with the flywheel. The shaft guides the parts into a straight arrangement, which can speed up the fitting process and reduce the chance of misalignment during assembly
• Compatibility and Limitations Note: This car alignment tool kit works with many passenger cars and light trucks that use a single-disc clutch setup. It is not suited for vehicles with dual-disc clutch systems. Please review your vehicle's specifications before ordering to aim to provide the tool matches your needs
• PVC Construction Resists Rust: The clutch adjustment tool body is formed from PVC material. Unlike metal alternatives, it does not grow rusty when exposed to damp conditions or occasional water contact. This material choice helps the tool remain functional over an extended period of ownership
• Contents and Dimensional Details: The package provides one clutch alignment tool and two expansion cone clips. The tool itself measures roughly 5.1 inches by 2.84 inches by 2.84 inches. To swap the cone clip, loosen the upper knob, reduce the threaded rod, and slide out the long adjustment screw for replacement
• Basic Operating Sequence: Select the correct expansion cone clip and fit it onto the clutch alignment tool. Stack the clutch disc against the pressure plate and insert the tool shaft through the center opening. Tighten the top knob first, followed by the lower knob, to secure the assembly in place