Application Fluid 4oz Spray Bottle | Bubble-Free Application | Allows Graphic to Be Re-Positioned Before Bonding | Bonds in 90 Seconds | for Vinyl Wraps, Decals & Stickers

RAPID TAC Application fluid for Vinyl Wraps Decals Stickers 4oz Sprayer For fast, easy, quality installation of vinyl graphics with no bubbles. Rapid Tac Application Fluid shocked installers by allowing them more control over their applications than ever before. Now what took hours could be accomplished in minutes. Using Rapid Tac Application fluid can often allow a large graphic to be installed with one person where two people were required to perform the same installation dry. Rapid Tac Application Fluid also cleans the substrate without leaving residues ensuring a contaminant free installation. It then helps to "float" the vinyl film until it is properly positioned. Rapid Tac Application Fluid's best feature is that it effectively breaks the surface tension of the adhesive on the film allowing it to flow and bond to the substrate more effectively than even a dry application. It is now possible to achieve a full bond in as little as ninety seconds. Your customers and your reputation will benefit from higher-quality applications. Your bottom line will benefit from faster applications and less failures as well. STEP 1. Clean surface thoroughly with Rapid Tac and a kitchen paper towel. DO NOT USE OTHER CLEANERS OR SOLVENTS. (We do recommend Rapid Prep as a pre-cleaner for surfaces that may have been exposed to wax, silicone, or other suspected contaminants) STEP 2. Spray surface again with Rapid Tac, peel backing off decal and place on wet surface. STEP 3. Position decal and spray top of decal to minimize scratching. Use squeegee to remove fluid, using a good deal of pressure and working from the center out to the edges in all directions. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www. P65Warnings. ca. gov.

• MAKES VINYL INSTALLATIONS FASTER & EASIER: Designed to simplify the vinyl application process, Rapid Tac helps reduce installation time and improve results when applying wraps, decals, or stickers to clean, smooth surfaces.
• AIDS IN BUBBLE-FREE APPLICATION: Formulated to help minimize bubbles during installation, Rapid Tac supports a clean, smooth surface so vinyl adheres evenly without imperfections.
• ALLOWS GRAPHICS TO BE RE-POSITIONED BEFORE BONDING: Prevents immediate adhesion so you can accurately adjust vinyl placement. Once squeegeed, the adhesive takes over naturally for a secure bond.
• BONDS IN AS LITTLE AS 90 SECONDS: After Rapid Tac is applied to prep the surface, the adhesive begins activating and can bond graphics in as little as 90 seconds for fast, efficient installations.
• READY TO USE 4OZ SPRAY BOTTLE: Comes pre-filled in a convenient 4oz sprayer. no mixing or assembly required. Simply spray, place, squeegee, and allow to dry. Ideal for vinyl wraps, decals, and stickers.