API pH Test Kit

pH Test Kit - pH control is imperative to prevent the harmful effects of water that is either too alkaline or too acidic for fish and plant life. Tests pH levels from 6.0 to 7.6. 250 tests per kit. For freshwater.

pH High Range Test Kit - Use to measure pH changes in marine aquariums, aquariums with African cichlids, and very alkaline tap water. Reads the pH of water within the high range of 7.4 to 8.8. 160 tests per kit. For fresh/saltwater.

Why Test pH?
pH is the measure of acidity of water. A pH reading of 7.0 is neutral. A pH higher than 7.0 is alkaline, and a pH lower than 7.0 is acidic. Maintaining your aquarium at the proper pH ensures optimal water quality.

Directions for Testing pH

NOTE: Read instructions thoroughly before testing. DO NOT allow Test Solutions to get into aquarium or pond.

To remove childproof safety cap: With one hand, push red tab left with thumb while unscrewing cap with free hand.

1. Fill a clean test tube with 5 ml of water to be tested (to the line on the tube).
2. Add three drops of Indicator Solution, holding dropper bottle upside down in a completely vertical position to ensure uniformity of drops.
3. Cap the test tube and invert tube several times to mix solution. Do not hold finger over open end of tube, as this may affect the test results.
4. Determine the pH reading by matching the color of the solution against those on the pH Color Chart. The tube should be viewed against the white area beside the color chart. Color comparisons are best made in a well-lit area. The closest match indicates the pH of the water sample. Rinse the test tube with clean water after each use.

Recommended pH Levels
A pH of 7.0 is ideal when keeping a community aquarium containing a variety of tropical fish. Goldfish should be kept in their own aquarium and prefer a pH of 7.5. Many Amazonian fish, like angelfish and neon tetras, prefer a pH of 6.5 to 6.8. Mollies and swordtails thrive at pH 7.2 to 7.5.

Frequency of Testing
The pH should be tested weekly, since natural materials in the water (such as fish waste and decaying food) can cause pH changes.