Adotec - DCF Repair Kit

Use this kit to repair small cuts, punctures or holes in your DCF gear on the fly by sticking a patch over the affected area. Repair patches come ready to use; just peel the back and apply.

Includes:

• 1 tape strip: 1 cm x 15 cm (1/2″ x 6″)
• 1 tape strip: 2 cm x 15 cm (1″ x 6″)
• 1 large rectangular patch: 4 cm x 7.5 cm (2″ x 3″)
• 4 square patches: 2.5 cm (1″ square)

For best results, make sure the material is dry and clean. The glue is pressure activated, so press down hard for a few seconds. The tape strips and large patches can be cut to size,  just use sharp scissors or an X-acto knife. DCF is difficult to cut, so make sure you use a sharp tool.

Integrity: If the patch sufficiently overlaps ‘healthy’ material on all sides, the functional integrity of your repaired item will not be weakened.

Note: If you get a large cut or hole that cannot be easily patched over, please contact Adotec, and we will be happy to make repair arrangements on a case-by-case basis.

Specs:

• Weight: 4g
• Dimensions: 15 × 8 × .1 in
• Material: 0.5 oz DCF – clear/grey